MPLS Guide
Description
This command enables or disables IPv6 prefix FEC capability on the session or interface.
Default
prefix-ipv6 disable
Parameters
enable | disable — enables or disables IPv6 prefix FEC capability
tcp-session-parameters
Syntax
tcp-session-parameters
Context
config>router>ldp
Description
This command enables the context to configure parameters for the TCP transport session of
an LDP session to a remote peer.
Default
n/a
peer-transport
Syntax
[no] peer-transport ip-address
Context
config>router>ldp>tcp-session-parameters
Description
This command configures the peer transport address, which is the IPv4 or IPv6 destination
address of the TCP connection to the LDP peer.
Default
n/a
Parameters
ip-address — the IPv4 or IPv6 address of the TCP connection to the LDP peer in dotted
auth-keychain
Syntax
auth-keychain name
no auth-keychain
Context
config>router>ldp>tcp-session-params>peer-transport
Description
This command associates an authentication keychain with LDP. The keychain is a collection
of keys used to authenticate LDP messages from remote peers. The keychain allows the
rollover of authentication keys during the lifetime of a session and also supports stronger
authentication algorithms than clear text and MD5.
The keychain must already be defined in the config>system>security>keychain context.
3HE 18686 AAAB TQZZA
decimal notation
Use subject to Terms available at: www.nokia.com
© 2022 Nokia.
Label Distribution Protocol
477