Table of Contents
Advertisement
MPLS Guide
collect-stats
Syntax
[no] collect-stats
Context
config>router>ldp>egr-stats>fec-prefix
Description
This command enables accounting and statistical data collection.
The collected statistic counters can be retrieved via show and monitor commands or with
the SNMPv3 interface. The counters can be saved to an accounting file if the specific
statistics collection record is included in the default accounting policy or in a user-defined
accounting policy.
When the no form of this command is issued, statistics are still accumulated by the
forwarding engine; however, the CPU will not obtain the results and write them to the
accounting file. If a subsequent collect-stats command is issued, then the counters written
to the accounting file will also include all the traffic that went through while the no collect-
stats command was in effect.
Default
no collect-stats
export
Syntax
export policy-name [policy-name ...(up to 5 max)]
no export
Context
config>router>ldp
Description
This command specifies export route policies that determine which routes are exported to
LDP neighbors. Configuring an export policy allows the LSR (Label Switch Router) to
advertise addresses other than the system IP address. Policies are configured in the
config>router>policy-options context. Refer to the "Route Policies" section in the
7705 SAR Router Configuration Guide.
If no export policy is specified, non-LDP routes will not be exported from the routing table
manager to LDP, and only LDP-learned routes will be exported to LDP neighbors.
If multiple policy names are specified, the policies are evaluated in the order they are
specified. The first policy that matches is applied. If multiple export commands are issued, the
last command entered will override the previous command. A maximum of five policy names
can be specified. The specified names must already be defined.
The no form of the command removes all policies from the configuration.
Default
no export
Parameters
policy-name — specifies the export route policy name. Allowed values are any string up
3HE 18686 AAAB TQZZA
to 32 characters long composed of printable, 7-bit ASCII characters. If the string
contains special characters (#, $, spaces, etc.), the entire string must be enclosed
within double quotes.
Use subject to Terms available at: www.nokia.com
© 2022 Nokia.
Label Distribution Protocol
459
Advertisement
Table of Contents
