Modifying Mpls Static Lsp Parameters; Deleting An Mpls Interface - Nokia 7705 SAR-W Series Manual

MPLS and RSVP-TE

3.21.5 Modifying MPLS Static LSP Parameters

Use the show>service>router>static-lsp command to display a list of LSPs.
In order to modify static LSP parameters, the config>router>mpls>static-lsp lsp-
name context must be shut down.
To modify an LSP:
Example:
The following example displays the static LSP configuration output.
ALU-1>config>router>mpls# info
----------------------------------------------
...
----------------------------------------------
ALU-1>config>router>mpls#

3.21.6 Deleting an MPLS Interface

To delete an interface from the MPLS configuration:
CLI Syntax:
144
1. Access the specific LSP by specifying the LSP name, and then shut it down.
2. Enter the parameter to modify and then enter the new information.
config>router# mpls
config>router>mpls# static-lsp "static-LSP"
config>router>mpls>static-lsp# shutdown
config>router>mpls>static-lsp# to 10.10.0.234
config>router>mpls>static-lsp# push 1023 nexthop
10.10.8.114
config>router>mpls>static-lsp# no shutdown
config>router>mpls>static-lsp# exit
static-lsp "static-LSP"
to 10.10.10.234
push 1023 nexthop 10.10.8.114
no shutdown
exit
no shutdown
1. Administratively disable the interface using the shutdown command.
2. Delete the interface with the no interface command.
mpls
interface ip-int-name
shutdown
exit
Use subject to Terms available at: www.nokia.com
© 2022 Nokia.
MPLS Guide
3HE 18686 AAAB TQZZA