Table of Contents
Advertisement
MPLS and RSVP-TE
Table 18
sr-te-lsp
Syntax
sr-te-lsp [lsp-name] [status {up | down}] [detail] path [path-name]
sr-te-lsp [lsp-name] [detail]
sr-te-lsp [sp-name] [status {up | down}] [to ip-address] [detail]
Context
show>router>mpls
Description
This command displays segment routing-traffic engineering (SR-TE) LSP information.
Parameters
lsp-name — displays SR-TE LSPs with the specified LSP name
status — displays SR-TE LSPs with the specified status (up or down)
detail — displays detailed information for the LSP template
path-name — displays SR-TE LSPs with the specified path name
ip-address — displays SR-TE LSPs connected to the IP address
Output
The following outputs are examples of MPLS SR-TE path information.
256
Router MPLS Path Field Descriptions
Label
Path Name
Adm
Hop Index
IP Address
Strict/Loose
Opr
LSP Name
Binding
Paths
•
Output Example: SR-TE LSP
Use subject to Terms available at: www.nokia.com
Description
The unique name label for the LSP path
Down — the path is administratively disabled
Up — the path is administratively enabled
The value used to order the hops in a path
The IP address of the hop that the LSP should traverse on the
way to the egress router
Strict — the LSP must take a direct path from the previous hop
router to the next router
Loose — the route taken by the LSP from the previous hop to
the next hop can traverse other routers
The operational status of the path (up or down)
The name of the LSP used in the path
Primary — the preferred path for the LSP
Secondary — the standby path for the LSP
Total number of paths configured
© 2022 Nokia.
MPLS Guide
3HE 18686 AAAB TQZZA
Advertisement
Table of Contents
