Table of Contents
Advertisement
Label Distribution Protocol
5.12.2.2
Note: The following command outputs are examples only; actual displays may differ
depending on supported functionality and user configuration.
5.12.2.2.1
discovery
Syntax
discovery [state state] [detail | summary] [adjacency-type type] [session ip-addr[label-
discovery [state state] [detail | summary] [adjacency-type type] [family]
discovery interface [ip-int-name] [state state] [detail | summary] [session ip-addr[label-
discovery peer [ip-address] [state state] [detail | summary] [session ip-addr[label-space]]
Context
show>router>ldp
Description
This command displays the status of the interfaces participating in LDP discovery.
Parameters
state — specifies the current operational state of the adjacency
detail — displays detailed information
summary — displays summary information
type — specifies the adjacency type
ip-addr — the IP address of the session
label-space — specifies the label space identifier that the router is advertising on the
family — displays either IPv4 or IPv6 LDP session information
ip-int-name — specifies an existing interface. If the string contains special characters (#,
ip-address — specifies the IP address of the peer
482
Show Commands
•
Show Router LDP Commands
•
Show Router LDP Bindings Commands
Show Router LDP Commands
space]]
space]] [family]
Values
established, trying, down
Values
link, targeted
interface
Values
0 to 65535
$, spaces, etc.), the entire string must be enclosed within double quotes.
Use subject to Terms available at: www.nokia.com
© 2022 Nokia.
MPLS Guide
3HE 18686 AAAB TQZZA
Advertisement
Table of Contents
