Table of Contents
Advertisement
MPLS Guide
The egress data path counters are updated for both originating and transit packets.
Originating packets may be service packets or IP user and control packets forwarded
either as BGP LU over LDP FEC or as VPRN traffic (MP-BGP) over LDP FEC or
simply over LDP FEC IGP shortcut. Transit packets of the FEC are label-switched on
this node.
When ECMP is enabled and multiple paths exist for a FEC, the same set of counters
is updated for each packet forwarded over any of the ECMP links for as long as this
FEC is active.
The LDP FEC counters are maintained over the lifetime of the FEC as long as
statistics are enabled. The user can clear the counters with the
clear>router>ldp>fec-egress-statistics command.
For more information about LDP FEC statistics commands, see
Reference.
3HE 18686 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com
MPLS and RSVP-TE
LDP Command
47
Advertisement
Table of Contents
