Table of Contents
Advertisement
MPLS Guide
3.21.3 Modifying an MPLS LSP
Some MPLS LSP parameters (such as primary and secondary), must be shut down
before they can be edited or deleted from the configuration.
The following example displays an MPLS LSP configuration output. Refer to
Configuring an MPLS
A:ALU-1>>config>router>mpls>lsp# info
----------------------------------------------
----------------------------------------------
A:ALU-1>config>router>mpls#
3.21.4 Modifying MPLS Path Parameters
In order to modify path parameters, the config>router>mpls>path context must be
shut down first.
The following example displays an MPLS path configuration output. Refer to
Configuring MPLS
A:ALU-1>config>router>mpls# info
#------------------------------------------
echo "MPLS"
#------------------------------------------
...
----------------------------------------------
3HE 18686 AAAB TQZZA
Interface.
shutdown
to 10.10.10.104
from 10.10.10.103
rsvp-resv-style ff
include "red"
exclude "green"
fast-reroute one-to-one
exit
primary "to-NYC"
hop-limit 50
exit
secondary "secondary-path"
exit
Paths.
path "secondary-path"
hop 1 10.10.0.111 strict
hop 2 10.10.0.222 strict
hop 3 10.10.0.123 strict
no shutdown
exit
path "to-NYC"
hop 1 10.10.10.104 strict
hop 2 10.10.0.210 strict
no shutdown
exit
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com
MPLS and RSVP-TE
143
Advertisement
Table of Contents
