Table of Contents
Advertisement
MPLS Guide
Output Example
A:ALU-48# show router mpls lsp auto-lsp mesh-p2p
===============================================================================
MPLS LSPs (Originating)
===============================================================================
LSP Name
-------------------------------------------------------------------------------
MESH-192.0.2.8-61456
MESH-192.0.2.9-61457
-------------------------------------------------------------------------------
Auto-LSPs : 2
===============================================================================
A:ALU-48#
Table 16
lsp-egress-stats
Syntax
lsp-egress-stats [type lsp-type] [active] [template-match]
lsp-egress-stats lsp lsp-name
Context
show>router>mpls
Description
This command displays RSVP LSP egress statistical information.
Parameters
lsp-type — specifies the type of LSP to display. The only available options are p2p and
3HE 18686 AAAB TQZZA
Router MPLS Auto LSP Field Descriptions
Label
LSP Name
Type
FastFail Config
Admin State
Oper State
LSPs
p2mp.
Use subject to Terms available at: www.nokia.com
Type
MeshP2P
MeshP2P
Description
The name of the LSP used in the path
The type of auto LSP
enabled — fast reroute is enabled. In the event of a failure,
traffic is immediately rerouted on the precomputed
protection LSP, thus minimizing packet loss
disabled — there is no protection LSP from each node on
the primary path
Down — the path is administratively disabled
Up — the path is administratively enabled
Down — the path is operationally down
Up — the path is operationally up
The total number of LSPs configured
© 2022 Nokia.
MPLS and RSVP-TE
Fastfail
Admin
Oper
Config
State
State
Yes
Up
Up
Yes
Up
Up
249
Advertisement
Table of Contents
