Table of Contents
Advertisement
MPLS Guide
5.12.2.1.4
session-parameters
Syntax
session-parameters
Context
config>router>ldp
Description
This command enables the context to configure peer-specific parameters.
peer
Syntax
[no] peer ip-address
Context
config>router>ldp>session-params
Description
This command configures parameters for an LDP peer.
Default
n/a
Parameters
ip-address — specifies the LDP peer in dotted-decimal notation
export-addresses
Syntax
export-addresses policy-name [policy-name...(up to 5 max)]
no export-addresses
Context
config>router>ldp>session-params>peer
Description
This command specifies the export prefix policy to local addresses advertised to this peer.
Policies are configured in the config>router>policy-options context. A maximum of five
policy names can be specified.
The no form of the command removes the policy from the configuration.
Default
no export-addresses
Parameters
policy-name — The export prefix route policy name. Allowed values are any string up to
3HE 18686 AAAB TQZZA
Session Parameters Commands
32 characters long composed of printable, 7-bit ASCII characters excluding double
quotes. If the string contains spaces, use double quotes to delimit the start and end
of the string. The specified name(s) must already be defined.
Use subject to Terms available at: www.nokia.com
© 2022 Nokia.
Label Distribution Protocol
475
Advertisement
Table of Contents
