Nokia 7705 SAR-W Series Manual page 266

MPLS and RSVP-TE
Table 19
static-lsp
Syntax static-lsp [lsp-name]
static-lsp [lsp-type]
static-lsp count
Context show>router>mpls
Description This command displays MPLS static LSP information.
Parameters lsp-name — name that identifies the LSP. The LSP name can be up to 32 characters long
lsp-type — type that identifies the LSP. The LSP type is one of the keywords transit or
count — the number of static LSPs that originate and terminate at the router
Output The following output is an example of MPLS static LSP information, and
the fields.
Output Example - static-lsp
ALU-12# show router mpls static-lsp
===============================================================================
MPLS Static LSPs (Originating)
===============================================================================
LSP Name
ID
-------------------------------------------------------------------------------
to131
1
to121
2
static-lsp_- 10.9.9.9
cc
3
-------------------------------------------------------------------------------
LSPs : 3
===============================================================================
*A:ALU-12>show>router>mpls#
266
Router MPLS SRLG Group Field Descriptions (Continued)
Label
Interfaces
No. of Groups
and must be unique.
terminate, where terminate displays the number of static LSPs that terminate at the
router, and transit displays the number of static LSPs that transit the router.
To
10.9.9.9
10.8.8.8
Use subject to Terms available at: www.nokia.com
Description
The interface where the SRLG group is associated
The total number of SRLG groups associated with the output
Next Hop Out Label Up/Down Time
10.1.2.2 131
10.1.3.2 121
10.1.2.2 35
© 2022 Nokia.
Table 20
Out Port
30d 02:42:53
n/a
30d 02:42:53
n/a
0d 01:39:34
n/a
3HE 18686 AAAB TQZZA
MPLS Guide
describes
Adm Opr
Up Down
Up Down
Up Down