Specifying Targeted Session Parameters - Nokia 7705 SAR-W Series Manual

Label Distribution Protocol
----------------------------------------------
ALU-1>config>router>ldp#

5.10.5 Specifying Targeted Session Parameters

Use the following CLI syntax to specify targeted session parameters:
CLI Syntax:
Example:
The following example displays the LDP targeted session configuration output.
ALU-1>config>router>ldp# info
----------------------------------------------
436
local-lsr-id system
no shutdown
exit
exit
targeted-session
exit
no shutdown
config>router# ldp
targeted-session
disable-targeted-session
hello timeout factor
keepalive timeout factor
peer ip-address
bfd-enable
hello timeout factor
keepalive timeout factor
local-lsr-id interface-name
no shutdown
config>router# ldp
config>router>ldp# targeted-session
config>router>ldp>targ-session# bfd-enable
config>router>ldp>targ-session# hello 5000 255
config>router>ldp>targ-session# keepalive 5000 255
config>router>ldp>targ-session# peer 10.10.10.104
config>router>ldp>targ-session>peer# hello 2500 100
config>router>ldp>targ-session>peer# keepalive 15 3
config>router>ldp>targ-session>peer# local-lsr-id to-104
config>router>ldp>targ-session>peer# no shutdown
config>router>ldp>targ-session>peer# exit
config>router>ldp>targ-session# exit
config>router>ldp#
import "LDP-import"
interface-parameters
hello 15 3
keepalive 30 3
interface "to-104"
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com
MPLS Guide
3HE 18686 AAAB TQZZA