Common Configuration Tasks; Enabling Ldp - Nokia 7705 SAR-W Series Manual

Label Distribution Protocol

5.10 Common Configuration Tasks

This section provides a brief overview of the following common configuration tasks
to configure LDP:

5.10.1 Enabling LDP

LDP must be enabled in order for the protocol to be active. MPLS must also be
enabled. MPLS is enabled in the config>router>mpls context.
Use the following CLI syntax to enable LDP on a 7705 SAR router:
CLI Syntax:
Example:
The following example displays the enabled LDP configuration output.
ALU-1>config>router# info
----------------------------------------------
...
#------------------------------------------
echo "LDP Configuration"
#------------------------------------------
----------------------------------------------
...
ALU-1>config>router#
432
• Enabling LDP
• Configuring Graceful Restart Helper Parameters
• Applying Import and Export Policies
• Configuring Interface Parameters
• Specifying Targeted Session Parameters
• Specifying Peer Parameters
• Configuring LDP Support for Multicast VPN (MVPN)
• Configuring LDP Support for LDP-to-SR Stitching
• Enabling LDP Signaling and Services
ldp
config>router# ldp
ldp
interface-parameters
exit
targeted-session
exit
exit
Use subject to Terms available at: www.nokia.com
© 2022 Nokia.
MPLS Guide
3HE 18686 AAAB TQZZA