Configuring Interface Parameters - Nokia 7705 SAR-W Series Manual

MPLS Guide
The following example displays the import and export policy configuration output.
ALU-1>config>router>ldp# info
----------------------------------------------
----------------------------------------------

5.10.4 Configuring Interface Parameters

Use the following CLI syntax to configure LDP interface parameters:
CLI Syntax:
Example:
The following example displays the LDP interface parameter configuration output.
ALU-1>config>router>ldp# info
----------------------------------------------
3HE 18686 AAAB TQZZA
export "LDP-export"
import "LDP-import"
interface-parameters
exit
targeted-session
exit
config>router# ldp
interface-parameters
hello timeout factor
interface ip-int-name
hello timeout factor
keepalive timeout factor
local-lsr-id {system | interface}
transport-address {system | interface}
no shutdown
keepalive timeout factor
transport-address {system|interface}
config>router# ldp
config>router>ldp# interface-parameters
config>router>ldp>if-params# interface to-104
config>router>ldp>if-params>if# hello 15 3
config>router>ldp>if-params>if# local-lsr-id system
config>router>ldp>if-params>if# no shutdown
config>router>ldp>if-params>if# exit
config>router>ldp>if-params# exit
config>router>ldp#
import "LDP-import"
interface-parameters
hello 15 3
keepalive 30 3
interface "to-104"
hello 15 3
keepalive 30 3
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com
Label Distribution Protocol
435