Table of Contents
Advertisement
MPLS Guide
Table 13
3HE 18686 AAAB TQZZA
MPLS LSP Detailed Field Descriptions (Continued)
Label
LSP Index
TTM Tunnel Id
From
To
Adm State
Oper State
LSP Up Time
LSP Down Time
Transitions
Path Changes
Retry Limit
Retry Timer
Signaling
Style
Hop Limit
MTU
Adaptive
Use subject to Terms available at: www.nokia.com
Description
The LSP index value
The Tunnel Table Manager tunnel identifier
The IP address of the ingress router for the LSP
The system IP address of the egress router for the LSP
Down — the path is administratively disabled
Up — the path is administratively enabled
Down — the path is operationally down
Up — the path is operationally up
The length of time that the LSP has been operational
The total time that the LSP has not been operational
The number of transitions that have occurred for the LSP
The number of path changes this LSP has had. For every path
change (path down, path up, path change), a corresponding
syslog/trap (if enabled) is generated.
The number of attempts that the software should make to re-
establish the LSP after it has failed
The time, in seconds, for LSP re-establishment attempts after an
LSP failure
The signaling style
SE (shared explicit) — specifies a shared reservation
environment with a limited reservation scope. This reservation
style creates a single reservation over a link that is shared by an
explicit list of senders.
FF (fixed filter) — specifies a dedicated reservation environment
with an explicit reservation scope. This reservation style specifies
an explicit list of senders and a distinct reservation for each of
them.
The maximum number of hops that an LSP can traverse,
including the ingress and egress routers
The size of the maximum transmission unit (MTU) that is
negotiated during establishment of the LSP
Indicates whether the make-before-break option is enabled or
disabled for resignaled paths
© 2022 Nokia.
MPLS and RSVP-TE
241
Advertisement
Table of Contents
