Installing Assistant Or Basic Control Panel On The Cabinet Door; Cdpi-02 Panel Bus Adapters; Brel-01 Relay Output Extension Module; Contents Of This Chapter - ABB ACS560 Hardware Manual

￭

Installing assistant or basic control panel on the cabinet door

The basic panel or assistant control can be connected to the cabinet door using
the screw inserts available behind the control panel.
For better aesthetics and convenience, you can install DPMP-02 surface mounting
platform or DPMP-01 flush mounting panel on the cabinet door and then install
the basic or assistant control panel. You can order DPMP-02 and DPMP-01 from
ABB.

CDPI-02 panel bus adapters

The CDPI-02 panel bus adapters can be used to connect a remote ACx-AP-x control
panel to the drive, or to chain the control panel or a PC to several drives on a panel
bus. For more information, see CDPI-01/-02 communication adapter module user's
manual (3AXD50000009929 [English]).

BREL-01 relay output extension module

￭

Contents of this chapter

This chapter contains a description and technical data of the optional BREL-01
relay output extension module.
￭

Safety instructions

WARNING!
Obey the safety instructions of the drive. If you ignore them, injury or
death, or damage to the equipment can occur.
Optional panel bus adapters and extension modules 227
RDUM-01
5
1
4
Drive
X101
RJ-45/Ethernet cable
2
3