Technical Data - ABB ACS560 Hardware Manual

No. Name/Value
0.0 ... 3000.0 s
15.09 RO4 OFF delay
0.0 ... 3000.0 s
15.10 RO5 source
Not energized
Energized
For the complete parameter list, refer to the drive firmware manual.
15.11 RO5 ON delay
0.0 ... 3000.0 s
15.12 RO5 OFF delay
0.0 ... 3000.0 s
15.13 RO6 source
Not energized
Energized
For the complete parameter list, refer to the drive firmware manual.
15.14 RO6 ON delay
0.0 ... 3000.0 s
15.15 RO6 OFF delay
0.0 ... 3000.0 s
15.16 RO7 source
Not energized
Energized
For the complete parameter list, refer to the drive firmware manual.
15.17 RO7 ON delay
0.0...3000.0 s
15.18 RO7 OFF delay
0.0...3000.0 s
￭

Technical data

External connectors: Four 3-pin (1×3) spring-clamp type terminal blocks, tin plated,
2
2.5 mm (14 AWG) wire size, pitch 5.0 mm.
Internal connectors: Connector X102 provides relay control signals from the control
board: 1×8 pin header, pitch 2.54 mm, height 33.53 mm. Connector X100 is not in
use in BREL-01: 2×4 pin header, pitch 2.54 mm, height 15.75 mm.
Optional panel bus adapters and extension modules 231
Description
Activation delay for RO4.
Defines the deactivation delay for relay output RO4.
Deactivation delay for RO4.
Selects a drive signal to be connected to relay
output RO5.
Output is not energized.
Output is energized.
Defines the activation delay for relay output RO5.
Activation delay for RO5.
Defines the deactivation delay for relay output RO5.
Deactivation delay for RO5.
Selects a drive signal to be connected to relay
output RO6.
Output is not energized.
Output is energized.
Defines the activation delay for relay output RO6.
Activation delay for RO6.
Defines the deactivation delay for relay output RO6.
Deactivation delay for RO6.
Selects a drive signal to be connected to relay
output RO7.
Output is not energized.
Output is energized.
Sets the activation delay for relay output 7.
Activation delay for relay output 7.
Sets the deactivation delay for relay output 7.
Deactivation delay for relay output 7.
Def /
FbEq16/32
10 = 1 s
0.0 s
10 = 1 s
Not
energized
0
1
...
0.0 s
10 = 1 s
0.0 s
10 = 1 s
Not
energized
0
1
...
0.0 s
10 = 1 s
0.0 s
10 = 1 s
Not
energized
0
1
...
0.0 s
10 = 1 s
0.0 s
10 = 1 s