Mechanical Installation - ABB ACS560 Hardware Manual

218 Optional panel bus adapters and extension modules
1 Grounding screw
2 Hole for mounting screw
5 2-pin terminal block for external power
supply
24 V AC/DC
40 24 V AC/DC + in
41 24 V AC/DC - in
4 3-pin terminal block for for transistor output
24 V DC
42 DO1 SRC
43 DO1 OUT
44 DO1 SGND
1) Digital output connection example
2) An externally supplied frequency indicator which provides, for example:
•
a 40 mA / 12 V DC power supply for the sensor circuit (CMOD frequency output)
•
suitable voltage pulse input (10 Hz ... 16 kHz).

Mechanical installation

Necessary tools
• Screwdriver and a set of suitable bits.
Unpacking and examining the delivery
1. Open the option package. Make sure that the package contains:
• the option module
• a mounting screw.
+
24V AC/DC + in
40
- 24V AC/DC - in
41
External 24 V (AC/DC) in-
put
External 24 V (AC/DC) in-
put
42 DO1 SRC
43 DO1 OUT
DO1 SGND
44
1)
42 DO1 SRC
43 DO1 OUT
44 DO1 SGND
2)
Source input
Digital or frequency out-
put
Ground (earth) potential
6 Diagnostic LED
3 3-pin terminal blocks for relay out-
puts
24 V DC
50 RO4C Common, C
51 RO4A Normally closed, NC
52 RO4B Normally open, NO
53 RO5C Common, C
54 RO5A Normally closed, NC
55 RO5B Normally open, NO
RO4C
50
RO4A
51
RO4B
52