Cmod-01 Multifunction Extension Module (External 24 Vac/Dc); Cmod-01 Multifunction Extension Module (External 24 V Ac/Dc And Digital I/O); Contents Of This Chapter; Product Overview - ABB ACS560 Hardware Manual

CMOD-01 multifunction extension module (external 24 V
AC/DC)
Note: In ACS560 drives, use CMOD-01 module as an interface for providing external
24 V AC/DC power supply and not as an I/O extension module.
￭ CMOD-01 multifunction extension module (external 24 V AC/DC and
digital I/O)

Contents of this chapter

This chapter describes how to install and start up the optional CMOD-01
multifunction extension module. The chapter also contains diagnostics and
technical data.

Product overview

The CMOD-01 multifunction extension module (external 24 V AC/DC and digital
I/O) expands the outputs of the drive control unit. It has two relay outputs and
one transistor output, which can operate as a digital or frequency output.
In addition, the extension module has an external power supply interface, which
can be used to power up the drive control unit in case the drive power supply is
not on. If you do not need the backup power supply, you do not have to connect
it because the module is powered from the drive control unit by default.
With CCU-24 control unit, a CMOD-01 module is not necessary for external
24 V AC/DC supply connection. The external supply is connected directly to
terminals 40 and 41 on the control unit.

Layout and example connections

5
Optional panel bus adapters and extension modules 217
1
4
3
6
3
2