Installing The Drive Vertically Side By Side; Installing The Drive Horizontally Side By Side - ABB ACS560 Hardware Manual

2
6. Remove the front cover as follows:
6. Remove the front cover as follows:
6. Remove the front cover as follows:
• Remove the fastening screws (a).
• Remove the fastening screws (a).
• Remove the fastening screws (a).
• Move the cover to the top side and then up.
• Move the cover to the top side and then up.
• Move the cover to the top side and then up.
6a

Installing the drive vertically side by side

￭ Installing the drive vertically side by side
Install the drive following the steps in the appropriate section
Installing the drive vertically side by side
vertically, frames size R0...R2
Install the drive following the steps in the appropriate section
R3...R4 (on page 49) or
Install the drive following the steps in the appropriate section
vertically, frames R0...R2 (page
50).
vertically, frames size R0...R2
R3...R4 (page 62) or
R3...R4 (on page 49) or
Flange mounting
50).
￭

Installing the drive horizontally side by side

Instructions for flange mounting are delivered with the flange mounting kit: Flange
Install the drive following the steps in the appropriate section mounting quick guide for frames R6 to R8 (3AXD50000019099 [English]). For more
Flange mounting
information on flange mounting, see Flange mounting supplement
vertically, frames R0...R2 (page
(3AXD50000019100 [English]).
R3...R4 (page 62) or
Instructions for flange mounting are delivered with the flange mounting kit: Flange
mounting quick guide for frames R6 to R8 (3AXD50000019099 [English]). For more
information on flange mounting, see Flange mounting supplement
(3AXD50000019100 [English]).
3
× 2
6a
6a
6a
6a
6a
(on page 47),
Installing the drive vertically, frames size R5...R8
61), Installing the drive vertically, frames
(on page 47),
Installing the drive vertically, frames R5...R8 (page
Installing the drive vertically, frames size R5...R8
61), Installing the drive vertically, frames
Installing the drive vertically, frames R5...R8 (page
Mechanical installation 65
4
M8
× 2
Mechanical installation 51
Installing the drive vertically, frame size
Installing the drive vertically, frame size
5
Mechanical installation 51
Installing the drive
Installing the drive
(on page
Installing the drive
63).
(on page
Installing the drive
63).