Electrical Power Network Specification; Motor Connection Data - ABB ACS560 Hardware Manual

Electrical power network specification

Voltage ( U 1 )
Network type
Rated conditional short-
circuit current (IEC 61439-
1)
Frequency
Imbalance
Fundamental power factor
(cos phi 1 )

Motor connection data

Motor types
Frequency
Frequency resolution
Current
Switching frequency
Input voltage range 3~ 380...480 V AC. This is indicated in the
type designation label as typical input voltage levels 3~ 400/480
V AC.
Public low voltage networks. TN (grounded), IT (ungrounded)
and corner-grounded TN systems. See section
compatibility with IT (ungrounded) and corner-grounded TN
systems (page 85).
65 kA when protected by fuses given in the fuse tables
47 to 63 Hz
Max. ± 3% of nominal phase to phase input voltage
0.98 (at nominal load)
Asynchronous AC induction motor
0....500 Hz
0.01 Hz
See section Ratings (page
2 kHz, 4 kHz, 8 kHz, 12 kHz (depends on the frame and parameter
settings)
Technical data 153
139).
Checking the