Installing Option Modules - ABB ACS560 Hardware Manual

116 Electrical installation
Connect the external supply or module to the +24V and DGND terminals (40 and
41).
For more information on how to feed auxiliary power to the drive, see
auxiliary power extension module (page
Power supply inside BAPO-01 works alongside the main power supply of the drive
and only takes over when the main power supply shuts down.
For voltage input specifications, see the technical data.

Installing option modules

The drive has 2 option slots:
• Front option: Slot 1 and 2 under the front cover.
• Side option: Slot on the side of the drive.
You can install the following optional modules in these option slots:
Module
Power extension - BAPO-01
I/O extension - BREL-01
DI1
DI2
RC
S1
RA
S2
RB
222).
Option slot
Side option slot
Side option slot
BAPO-01
Applicable frames
R0...R2
R0...R2