Target Groups And Required Qualification; Handling; Mechanical Installation; Electrical Installation - ABB ACS5000 User Manual

Term Definition
PICW Person in charge of work
PINT Pulse interface
PPE Personal protective equipment
PTW Permit to work
The S800 I/O is a distributed process input / output system that can be
S800 I/O
connected to various process controllers from ABB and other companies.
The synchronized bypass unit (SBU) is a control cabinet that provides control to
SBU the startup motor and then synchronizes the motor to the supply network to start
direct-on-line operation (and vice versa)
SW Software
Transformer This is the customer terminal for connecting transformer cables. It is located in
terminal section the back of the PCU compartment.
WCU The water cooling unit (WCU) dissipates heat losses of the power electronics.

1.5. Target groups and required qualification

The drive presented in this manual is part of an industrial environment where voltages are
present that contain a potential hazard of electric shock and / or burn. For this reason, only
personnel who have a thorough knowledge of the drive and the industrial environment and have
obtained the required qualification should handle, install, operate, or maintain the drive.
The manual addresses personnel who are responsible for unpacking, transportation,
installation, operation and maintenance of the drive. The personnel must carry out the below
listed tasks in a manner that does not cause physical harm or danger, and ensures the safe and
reliable functioning of the drive.
IMPORTANT! Commissioning of the drive must only be performed by qualified and certified
ABB personnel

1.5.1. Handling

Personnel must be skilled and experienced in unpacking and transporting heavy equipment.

1.5.2. Mechanical installation

The personnel must be qualified to prepare the installation site according to the site and
equipment requirements and to perform the installation accordingly.

1.5.3. Electrical installation

Personnel must have a sound knowledge of the relevant electrical codes and specifications
covering low and medium voltage equipment, be experienced with electrical wiring principles
and know the electrical symbols typically used in wiring diagrams.
PRODUCT
ACS5000W gen. 2
DOCUMENT KIND
User manual
DOCUMENT ID.
3BHS799208 E01
ABOUT THIS MANUAL
REV. LANG. PAGE
J en 17/186