Logging In To An Ap Through Stelnet - Huawei AP8082DN Hardware Installation And Maintenance Manual

AP8082DN and AP8182DN
Hardware Installation and Maintenance Guide
l
Logging In to the AP
Step 1 Open the browser on the PC, enter http://IP address or https://IP address in the address box,
and press Enter. The login page is displayed.
Step 2 Select a language for the web platform, enter the default user name and password, and click
Login. The web platform home page is displayed.
For the sake of security, you are prompted to change the password when logging in to the web
platform for the first time. After you change the password, re-log in to the AP.
----End

6.10.3.2 Logging In to an AP Through STelnet

Applicable Mode
This login mode is applicable to Fit APs, Fat APs, and cloud APs.
Before logging in to an AP through STelnet, connect a terminal to the AP using an Ethernet
cable or in wireless mode to ensure that they are reachable to each other. Then you can log in
to the AP using an SSH client.
Table 6-41 Default parameters of an AP
Parameter
SSID
Issue 03 (2019-04-01)
In wireless mode
Figure 6-177 Connecting to an AP in wireless mode
a. Configure the terminal to automatically obtain an IP address.
b. Within the coverage of the AP, search for the WLAN on the terminal. You can
access the WLAN directly or by entering the correct wireless password.
Fit AP
hw_manage_xxxx
(xxxx specifies the
last four digits of
the AP's MAC
address.)
Copyright © Huawei Technologies Co., Ltd.
Table 6-41 lists default parameters of an AP.
Fat AP
HUAWEI-XXXX
(XXXX specifies the
last four digits of the
AP's MAC address.)
6 Appendix
Cloud AP
hw_manage_xxxx
(xxxx specifies the last
four digits of the AP's
MAC address.)
187