Installing The Cord End Terminal - Huawei AP8082DN Hardware Installation And Maintenance Manual

AP8082DN and AP8182DN
Hardware Installation and Maintenance Guide
l
----End

6.1.5.2.2 Installing the Cord End Terminal

Procedure
Step 1 Hold a cord end terminal upright and place it on a terminal jack, as shown in
ensure bump contact and dense connection, place the plain side of the terminal outwards.
Figure 6-114 Placing a terminal on a terminal jack vertically
Step 2 Insert the terminal into the jack vertically, and turn the screw clockwise to fasten the terminal,
as shown in
Figure 6-115 Feeding the terminal into the jack
Issue 03 (2019-04-01)
If the two terminals are different sizes, place the smaller one above the bigger one. A
maximum of two terminals can be installed on a post.
To remove an OT terminal, loosen the screw counterclockwise.
Figure 6-115.
Copyright © Huawei Technologies Co., Ltd.
6 Appendix
Figure 6-114. To
113