Huawei AP8082DN Hardware Installation And Maintenance Manual page 112

AP8082DN and AP8182DN
Hardware Installation and Maintenance Guide
Figure 6-97 Stripping the feeder
Step 2 Route the Cable jacket (E) through the nut (D), as shown in
Figure 6-98 Installing the nut
Step 3 Install the clip (C) on the Cable jacket (E) and move the clip until the clip is close to the Cable
jacket, as shown in
Figure 6-99 Installing the clip
Step 4 Peel off the shielded layer (F) to the direction of the clip (C) so that the aluminum foil (G) is
exposed, as shown in
Issue 03 (2019-04-01)
Figure 6-99.
Figure 6-100.
Copyright © Huawei Technologies Co., Ltd.
Figure 6-98.
6 Appendix
105