Table of Contents
Advertisement
AP8082DN and AP8182DN
Hardware Installation and Maintenance Guide
3.
4.
Issue 03 (2019-04-01)
Figure 2-5 Removing the waterproof block
Assemble the connector on the optical fiber.
a.
Assemble the external connector shell and support, as shown in the following
figure.
Figure 2-6 Assembling the connector (1)
b.
Put the rubber ring on the optical fiber and insert it into the support in compliance
with the direction indicated on the ring, as shown in the following figure.
Figure 2-7 Assembling the connector (2)
NOTE
Ensure that the arrow on the rubber ring points to the support.
Remove the sealing cover of the optical fiber port on the device and insert the optical
fiber into the port. Turn the support to find the correct optical fiber installation slot and
push the support forward (together with the rubber ring) until the optical fiber is installed
Copyright © Huawei Technologies Co., Ltd.
2 AP Installation
33
Advertisement
Table of Contents
