Huawei AP8082DN Hardware Installation And Maintenance Manual page 67

AP8082DN and AP8182DN
Hardware Installation and Maintenance Guide
Figure 6-17 Compacting the shield layer
1. Shield layer
Step 7 Tighten the socket and enclosure until the red line on the socket is invisible, as shown in
Figure
Figure 6-18 Tightening the socket and enclosure
Step 8 Pre-tighten the nut and socket and further tighten the nut using a torque wrench (opening
width: 28 mm), as shown in
Issue 03 (2019-04-01)
NOTE
Cut the extra shield layer using the diagonal pliers.
6-18.
Copyright © Huawei Technologies Co., Ltd.
Figure 6-19.
6 Appendix
60