Installing Ethernet Adapters; Installing A Shielded Ethernet Connector - Huawei AP8082DN Hardware Installation And Maintenance Manual

AP8082DN and AP8182DN
Hardware Installation and Maintenance Guide
Use the outdoor binding strap to bind cables under the DC power cable connector for weight
bearing, preventing the DC power cable connector from being pulled. Reserve the proper
cable length between the binding point and the PWR port.
----End

6.1.5.3 Installing Ethernet Adapters

6.1.5.3.1 Installing a Shielded Ethernet Connector

Procedure
Step 1 Hold the male and female connectors, with the male connector facing the female connector, as
shown in
Figure 6-122 Holding the male and female shielded connectors
Step 2 Insert the male connector into the female connector, as shown in
Figure 6-123 Feeding the male shielded connector into the female shielded connector
Issue 03 (2019-04-01)
Figure 6-122.
Copyright © Huawei Technologies Co., Ltd.
6 Appendix
Figure 6-123.
117