Table of Contents
Advertisement
AP8082DN and AP8182DN
Hardware Installation and Maintenance Guide
Procedure
Step 1 Remove the dustproof cap of the FC connector and store it for future use.
Step 2 Align the core pin of the male connector with that of the female connector, as shown in
Figure
Figure 6-130 Aligning the male connector with the female connector
Step 3 Align the male connector with the female connector and gently push the male connector until
it is completely seated in the female connector, as shown in
Figure 6-131 Feeding the male connector into the female connector
Step 4 Fasten the locking nut clockwise and ensure that the connector is securely installed, as shown
in
Figure
Issue 03 (2019-04-01)
6-130.
6-132.
Copyright © Huawei Technologies Co., Ltd.
Figure
6-131.
6 Appendix
121
Advertisement
Table of Contents
