Installing An Unshielded Ethernet Connector - Huawei AP8082DN Hardware Installation And Maintenance Manual

AP8082DN and AP8182DN
Hardware Installation and Maintenance Guide
Step 3 When you hear a click, the cable connector is completely inserted in the port. (The clip on the
cable connector pops up to fix the connector in the port.) Pull the connector slightly and
ensure that it is securely connected, as shown in
Figure 6-124 Installed shielded Ethernet connector
Step 4 To remove an Ethernet connector, press the locking key and pull out the connector, as shown
in Figure
Figure 6-125 Removing a shielded Ethernet connector
----End

6.1.5.3.2 Installing an Unshielded Ethernet Connector

Procedure
Step 1 Hold the male and female connectors, with the male connector facing the female connector, as
shown in
Issue 03 (2019-04-01)
6-125.
Figure 6-126.
Copyright © Huawei Technologies Co., Ltd.
Figure 6-124.
6 Appendix
118