Ap First-Time Login; Logging In To An Ap Through Stelnet - Huawei AP8082DN Hardware Installation And Maintenance Manual

AP8082DN and AP8182DN
Hardware Installation and Maintenance Guide
AP
Mode
Fat
Cloud

6.10.2 AP First-Time Login

In most cases, a new AP works in Fit mode by default. To switch its working mode, log in to
the AP first. A Fit AP allows for login through STelnet or console.

6.10.2.1 Logging In to an AP Through STelnet

Before logging in to a Fit AP through STelnet, connect a terminal to the AP using an Ethernet
cable or in wireless mode to ensure that they are reachable to each other. Then you can log in
to the AP using an SSH client.
Issue 03 (2019-04-01)
Connectio Login
n Mode Mode
Ethernet STelnet
cable
Wireless
Console Console
Ethernet STelnet
cable
Wireless
Ethernet Web
cable
Wireless
Console Console
Ethernet STelnet
cable
Wireless
Ethernet Web
cable
Wireless
Table 6-38
Copyright © Huawei Technologies Co., Ltd.
Version Description
Support
All versions AP is powered on, allowing for
wireless connections. After the
AP goes online on the AC, the
From
offline management VAP is
V200R007C10
disabled and will not be
enabled when the AP goes
offline.
From V200R009C00, the
offline management VAP is
enabled automatically when a
Fit AP goes offline from the
AC.
All versions -
All versions
From
V200R008C10
All versions
All versions
All versions From V200R007C20, cloud
APs support the offline
All versions
management VAP.
From
V200R007C20
All versions
From
V200R007C20
lists default parameters of a Fit AP.
6 Appendix
179