AP8082DN and AP8182DN
Hardware Installation and Maintenance Guide
Parameter
Stop bits (S)
Flow control (F)
User name
Password
In versions earlier than V200R009C00, when you log in to a cloud AP through the console port, no default
user name or password is available. Upon your first login, configure the login password.
Connecting to an AP
You can connect a PC to the console port of an AP through a console cable.
Figure 6-180 Connecting to an AP through a console cable
Logging In to the AP
Step 1 Start terminal emulation software on the PC, create a connection, and set communication
parameters according to
Step 2 Press Enter, enter authentication information as prompted, and log in to the user interface.
(The following information is for reference only.)
For a Fit or cloud AP, enter the default user name admin and password admin@huawei.com.
You are advised to change the default user name and password upon your first login.
Login authentication
Username: admin
Password:
Info: You are advised to change the password to ensure security.
For a Fat AP, you need to set the console login password upon the first login, and then log in
using this password.
Please configure the login password:
Info: A plain text password is a string of 8 to 16 case-sensitive characters and
Issue 03 (2019-04-01)
NOTE
Table
Copyright © Huawei Technologies Co., Ltd.
Default Value
1
None
Fit AP and cloud AP: admin
Fat AP: None
Fit AP and cloud AP: admin@huawei.com
Fat AP: None (configured when the user
logs in for the first time)
6-42.
6 Appendix
191