Replacing The Mold Of The Crimping Tool - Huawei AP8082DN Hardware Installation And Maintenance Manual

AP8082DN and AP8182DN
Hardware Installation and Maintenance Guide
Figure 6-143 Disassembling an MPO fiber connector
----End

6.1.6 Replacing the Mold of the Crimping Tool

Procedure
Step 1 Hold the handles of a pair of COAX crimping tools. Loosen the two fastening screws
counterclockwise, as shown in
Figure 6-144 Loosening two fastening screws
Step 2 Hold the handles of the COAX crimping tools to open the self-locking mechanism. The jaw
of the COAX crimping tools opens automatically, as shown in
Issue 03 (2019-04-01)
Figure 6-144.
Copyright © Huawei Technologies Co., Ltd.
6 Appendix
Figure 6-145.
127