Installing A 2-Pin Round Connector And A Dc Power Cable - Huawei AP8082DN Hardware Installation And Maintenance Manual

AP8082DN and AP8182DN
Hardware Installation and Maintenance Guide
l Ensure that the exposed section of the terminal is less than 2 mm (0.079 in.) in length.
l Do not press the insulation of the terminal.
l Insert only one terminal into one jack.
Step 3 Move the cable slightly and ensure that it is securely connected.
Step 4 Before you remove a cord end terminal, loosen the screw counterclockwise.
----End

6.1.5.2.3 Installing a 2-Pin Round Connector and a DC Power Cable

This topic describes how to install a 2-pin round connector and a DC power cable and related
notes.
Context
Figure 6-116
Figure 6-116 2-pin round connector and a DC power cable
Procedure
Step 1 Waterproof cables to be connected.
1.
Issue 03 (2019-04-01)
shows the 2-pin round connector with a DC power cable.
Wrap a layer of PVC tape from the bottom top, with the later covering one third of the
previous one, as shown in
Figure 6-117 Wrapping the PVC tape
Copyright © Huawei Technologies Co., Ltd.
Figure 6-117.
6 Appendix
114