Installing An Mpo Connector - Huawei AP8082DN Hardware Installation And Maintenance Manual

AP8082DN and AP8182DN
Hardware Installation and Maintenance Guide
Figure 6-139 Installed SC fiber connector
Step 4 To disassemble an SC fiber connector, hold the shell of the connector (do not hold the fiber)
and gently pull the connector in the direction vertical to the adapter. Unlock the male
connector, and then separate it from the shell, as shown in
Figure 6-140 Disassembling an SC fiber connector
----End

6.1.5.4.5 Installing an MPO Connector

Procedure
Step 1 Remove the dustproof cap of the MPO fiber connector and store it for future use.
Step 2 Align the core pin of the male connector with that of the female connector, as shown in
Figure
Issue 03 (2019-04-01)
6-141.
Copyright © Huawei Technologies Co., Ltd.
Figure 6-140.
6 Appendix
125