Replacing The Mold Of The Crimping Tool - Huawei AP4050DN Hardware Installation And Maintenance Manual

AP4050DN-HD
Hardware Installation and Maintenance Guide
Figure 5-71 Disassembling an MPO fiber connector
----End

5.1.5 Replacing the Mold of the Crimping Tool

Procedure
Step 1 Hold the handles of a pair of COAX crimping tools. Loosen the two fastening screws
counterclockwise, as shown in Figure 5-72.
Figure 5-72 Loosening two fastening screws
Step 2 Hold the handles of the COAX crimping tools to open the self-locking mechanism. The jaw
of the COAX crimping tools opens automatically, as shown in Figure 5-73.
Issue 01 (2016-04-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Appendix
69