17.4. Parameter menu
With this tool, parameter panels grouped as windows for each function are prepared.
Select the name of the parameter to be referred to with the [Parameter menu] button (<a>) on "Parameter
window".
(1) The T/B version is before 3.2
(2) The T/B version is after 3.2 or later
The parameter menu is changed by increasing the parameter menu item.
(Note) [WORK coordinate parameter] is available with Ver.2.3 or later of this software. [I/O unit] and [Force control]
are available with Ver.3.0 or later of this software. Moreover, there is a restriction of the software version of
the controller which can use this function. Please refer to each screen explanation for details.
<a>
<a>
151