Replace - Mitsubishi Electric R56TB Instruction Manual

11.1.13. Replace

If the program of the USB memory is being edited, the specification character string can be replaced by
command edit.
It can be specified whether the capital letter/small letter is differentiated or not.
1) Taps the [Menu] button and select the "Replace" (<a>) of the command edit screen, the setting screen will
be displayed.
The line of code selected beforehand is inputted into "Find what" as a specification character string.
<a>
2) The input of the character string to search or replace, taps the [Edit] button (<b>), and uses the keyboard
that displayed. The character strings of searching are specified as "Find what", and of replacement are
specified as "Replace with". (<c>) The cursor is movable by the [Up]/[Down] key (<d>) of the keyboard.
Tap the [Enter] key (<e>) of the keyboard to finish the input.
3) If each button of the replacement character string specified screen is tapped, it will operate as follows. (<f>)
［Find next］button ........ Search of the character string
［Replace］button .......... Replace the one place and search the next.
［Replace all］button ..... Replace all the searched character strings.
［Close］button ............. Finish. Close the screen.
If the "Match case" is checked at this time, the capital letter and the small letter will be differentiated.
CAUTION
When executing replacement, the message of confirmation does not display.
The character strings of the line selected will be replaced, if you tap the [Replace] button.
All character strings to the last of program will be replaced, if you tap the [Replace all] button.
Please check that the specified character string is correct before executing replacement.
<c>
<b>
<f>
52
<e>
<d>