Mitsubishi Electric R56TB Instruction Manual page 123

2) Pseudo-input
With the pseudo-input mode, the values input from the following window will be interpreted as the
input register values instead of the registers input from an external source.
i) First, read out the registers to be pseudo-input. Up to 16 sequential registers can be set
simultaneously.
Input the head No. of the register to be read and the number of registers to read, and then tap on
the [Set] button. (<d>)
ii) The values of the designated number of registers will appear with the designated register at the
head.
iii) Set the register value, and tap on the [INPUT] button. (<e>)
The pseudo-input mode is canceled when this window is closed.
3) Forced output
The registers can be forcibly output.
i) First, read out the registers to be forcibly output. Up to 16 sequential registers can be output
simultaneously.
Input the head No. of the register to be read and the number of registers to read, and then tap on
the [Set] button. (<f>)
ii) The designated number of registers will appear with the designated register at the head.
iii) Set the register value, and tap on the [OUTPUT] button. (<g>)
<d>
<e>
<f>
<g>
109