Mitsubishi Electric R56TB Instruction Manual page 239

Fixed-dimension
Off Press the button to move the axis.
High The axis will move the amount specified by the JOG parameter
movement amount H.
The axis will move the amount specified by the JOG parameter
Low
movement amount L.
Runtime button image
Press the T / B [TEACH] switch to activate T / B, then turn the servo power on and press the T / B enable switch to
continue using the jog button.
Description
Creation button image
Move J1 axis.
Move J2 axis.
Move J3 axis.
Move J4axis.
Move J5 axis.
Move J6 axis.
Move J7 (additional axis) axis.
Move J8 (additional axis) axis.
Move in X coordinate direction.
Move in Y coordinate direction.
Move in Z coordinate direction.
Rotate around the X axis.
Rotate around the Y axis.
Rotate around the Z axis.
Move L1 (additional axis) axis.
Move L2 (additional axis) axis.
Description
225