19.2. Operation of user definition screen
The user definition screen can be displayed by the following operations.
(1) Tap the [MENU] button (<a>) of a T/B screen and display menu panel.
(2) Tap the [User Definition] button (<b>) in the menu.
(3) The user definition screen is displayed.
<1>
<1> User definition screen
<2> Page name
<3>
<4>
CAUTION
Output signals in the T/B disabling state
You can output signals by tapping the button in the T/B disabling state, version 3.4 or later.
But please note that you cannot output signals by tapping the button in the T/B disabling state,
version 3.3 or earlier.
<2>
<3>
: The registered user definition screen is displayed.
On this screen, you can change the value of the variable parts set value edit
Enable by tapping this parts and displaying the input value screen. (Only at
T/B state is enabling.)
: The name of the user definition screen is displayed.
: The page is switched.
233
<b>
(Note) "User definition screen" is supported by
version 2.2 or later of this software.
<4>
<a>