17.2. Downloading the parameter list (Robot controller -> T/B)
The message to confirm whether to download the parameter list when the parameter edit is started might be
displayed.
This message will be appeared in the following cases.
(1) When the parameter list can be read from the robot controller or when the [Read] button (<a>) is tapped on
"Parameter window" of T/B.
(2) When there is no parameter list information in the T/B.
(3) When the parameter list used in the robot controller is newer than the parameter list already stored in the
T/B.
* Although it will takes few minutes to download the parameter list information, using the latest parameter
information is recommended.
If the parameter list information is not read out correctly, the following type of window will appear.
<a>
149