13. Program management
The program files can be copied, moved, deleted, protected, renamed and the contents compared.
13.1. Starting
Select the "Program" from the menu, and program list shown below appears.
Since this software Ver.2.3, "*SQ Direct" is displayed in the top of the program list when connecting with controller
which can use the SQ Direct Function. This is the file which position data for SQ Direct Function is saved. The
position data for SQ Direct Function can be edited / operated by operating the file "*SQ Direct".
CAUTION
The targets of any operations in this function are the Robot program
files.
CAUTION
Do not write-protect the USB memory when you do the operation as
write to it.
Even if it seems to have been able to write it without the error occurring by the operation
copy and delete etc., when write-protection of USB memory is released, all operation is
canceled. And an empty (size 0) file might be generated.
79