ABB Relion 670 Series Applications Manual page 468

Hide thumbs Also See for Relion 670 Series:

Table of Contents

Name of input

The sum of the numbers in column "Value when activated" when all INx (where 1≤x≤16) are

active that is=1; is 65535. 65535 is the highest boolean value that can be converted to an

integer by the B16I function block.

Boolean to integer conversion with logical node

representation, 16 bit BTIGAPC

Identification

Function description

Boolean to integer conversion with

logical node representation, 16 bit

Boolean to integer conversion with logical node representation, 16 bit (BTIGAPC) is used to

transform a set of 16 binary (logical) signals into an integer. BTIGAPC has a logical node

mapping in IEC 61850.

The BTIGAPC function will transfer a combination of up to 16 binary inputs INx where 1≤x≤16 to

an integer. Each INx represents a value according to the table below from 0 to 32768. This

follows the general formula: INx = 2

INx will be available on the output OUT as a sum of the values of all the inputs INx that are

activated. OUT is an integer. When all INx where 1≤x≤16 are activated that is = Boolean 1 it

corresponds to that integer 65535 is available on the output OUT. BTIGAPC function is

designed for receiving up to 16 booleans input locally. If the BLOCK input is activated, it will

freeze the output at the last value.

identification

where 1≤x≤16. The sum of all the values on the activated

ANSI/IEEE C37.2

identification

device number

1MRK 511 401-UEN Rev. K

SEMOD175753-1 v4

SEMOD175757-2 v5

SEMOD175849-4 v6

Bay control REC670

Application manual

Relion rec670