Advertisement
DC 13.8V
1.
Power Supply - 2.1 x 5.5 mm coaxial jack, center is positive (+).
IMPORTANT: Be sure to observe the proper polarity!
iLINK
2.
MiniDIN-6 for connection with microHAM MKII, MK2R or function expansion module.
3.
USB
USB B connector for computer connection.
Standard USB A-B cable.
4.
SERIAL
RS232 level serial port.
DB9 female jack.
See "Connecting Hardware" chapters for details.
PA
5.
DB15 female jack for connection with Power Amplifier.
Compatible with microHAM "PA" cables.
See "Connecting Hardware" chapters for details.
6.
PORT A
DB25 female jack for antenna switch connection.
See "Connecting Hardware" chapters for details.
7.
PS/2
MiniDIN6 for PS/2 keyboard or PS/2 keypad.
INHIBIT
8.
Power inhibit output for transceiver.
RCA jack TIP - Signal SHELL – GND.
CAT
9.
4 pole 3.5mm phone jack for transceiver control. Compatible with microHAM "CAT" cables.
GND
10.
Terminal for connection to station ground.
iLINK
11.
MiniDIN-6 for connection with microHAM microKEYER II, MK2R, or function expansion module.
microHAM © 2016 All rights reserved
Rear Panel
8
Advertisement
