Advertisement
Two wire Beverage #2
9.
Frequency coverage RX: 160-30m
RX Only: YES
Control: 12V, 1 wire for direction control
Rotator: 2 fixed directions, SW, NE
Placement: Free
RX safe: YES
Special requirement: LNA3
Note: Default (no control power) direction is NE
INV Vee
10.
Frequency coverage RX/TX: 1810-1850
RX Only: NO
Control: None
Rotator: None, Bidirectional NW-SE
Placement: Vertical guying wires
RX safe: YES
Special requirement: Antenna can not be used if Vertical is in use.
Note: None
Low Dipole
11.
Frequency coverage RX/TX: 80m, 2 segments
RX Only: NO
Control: 12V, 1 wire for segment selection
Rotator: None, Bidirectional NW-SE
Placement: Vertical guying wires
RX safe: YES
Special requirement: A Antenna can not be used if Vertical is in use.
Note: Segments 3500-3600, 3700-3800, first segment is default (no control power)
Vertical
12.
Frequency coverage RX/TX: 160, 80, 40m, 9 segments
RX Only: NO
Control: 12V, 8 wires for segments selection
Rotator: None, Omni directional pattern
Placement: Vertical
RX safe: YES
Special requirement: Antenna can not be used if INV Vee or Low Dipole is in use.
Note: Segments 1810-1830, 1830-1860, 1860-1900, 1900-1930, 3500-3600, 3600-3700, 3700-3800,
7000-7150, 7150-7300, default (no control power) is first segment
DXE RFS-2
13.
Frequency coverage RX: 160-40m
RX Only: YES
Control: 12V, 2 wires for BCD direction control + 1 wire for preamplifier power
Rotator: 4 fixed directions
Placement: Free
RX safe: NO
Special requirement: LNA1
Subselection buttons control azimuth: [1]=SW, [2]=NW, [3]=NE, [4]=SE, any two or more buttons makes
no change. Preamplifier must be turned off when antenna is not used and when TFS-4 or Low Dipole
antenna transmits. Transmission on other antennas must have no effect to preamplifier sequencing.
Antenna must be usable simultaneously by another start point (receiver) on another band.
Note: Default (no control power) direction is NW
microHAM © 2016 All rights reserved
108
Advertisement
