Advertisement
STATUS LEDs
1.
POWER
LED lights when +13.8V is applied (power switch on).
ALARM
LED lights when "ALARM" condition happens, transmission may be inhibited.
BUSY
LED lights when "BUSY" condition happens, transmission is inhibited.
LED flashes when "BUSY" condition happens, transmission is allowed.
READY
LED lights when transmission is allowed.
LED flashes when transmit condition has been changed and will be applied on next transmission
cycle.
uLINK
LED lights when uLINK interface is powered from uLINK HUB.
FUNC/MENU
2.
Short press and release opens "Function" list.
Press and hold for more than one second opens "Menu" list.
Antenna selection nr. 1
3.
Antenna selection nr. 2
4.
Antenna selection nr. 3
5.
6.
Antenna selection nr. 4
Antenna selection nr. 5
7.
Antenna selection nr. 6
8.
Antenna selection nr. 7/NEXT
9.
Antenna selection nr. 7. If there are more than 7 selections this button moves to next page of
antenna selections
microHAM © 2016 All rights reserved
3 - HARDWARE DESCRIPTION
Front Panel
6
Advertisement
