Advertisement
Internal Rotator Control:
Three (3) programmable relay outputs
•
Both poles of relay contact available
•
Configurable support for BRAKE or SPEED control
•
Support for multi-turn rotators
•
Support for rotators with analog (pot) or discrete (pulse) azimuth read back
•
Programmable software limit switches
•
Dead zone definition
•
Target finding strategy selection for optimal handling
•
Support for "slipping" rotators
•
Four memories for most wanted azimuths
•
Automatic azimuth control from logger
•
Virtual Rotator Control:
Unlimited number of antennas can be joined to Virtual Rotator
•
Programmable azimuth ranges for each Virtual Rotator antenna
•
Automatic azimuth control from logger
•
Unlimited number of Virtual Rotators per Band
•
Power Amplifier Control:
Automatic tuning for CI-V controlled automatic amplifiers (Icom PW1, Expert SPE, OM-Power)
•
Automatic band switching for BCD controlled amplifiers (Yaesu VL-1000, FL-7000)
•
Support for QSK Power Amplifiers
•
Support for "shared" Power Amplifiers
•
Allows control of all station devices (antennas, rotators, amplifiers) by multiple operating positions
•
Virtually unlimited number of configurable relay outputs
•
Virtually unlimited number of rotators
•
Virtually unlimited number of serial port control devices
•
Support for stacked antennas including complex topologies (e.g., stacked stacks)
•
Intelligent rotator control including linked/slave rotators like rotator on rotary tower
•
Configurable interlocks to prevent damage and support various operation styles or contest rules in any
•
kind of multi-transmitter stations
Special handling of "shared" devices – e.g., muti-band antennas, shared amplifiers, SteppIR and
•
UltraBeam antennas
ALWAYS check the polarity of the 13.8 V power supply.
DO NOT perform any upgrade through Station Master Deluxe.
microHAM © 2016 All rights reserved
uLINK Features
2 - IMPORTANT WARNINGS
If your radio includes upgradeable firmware
5
Advertisement
