Advertisement
The Windows setup utility will start and ask into which
folder Router and its supporting files should be
installed. Note: unless you have a very strong reason
to install Router elsewhere, please accept the default
location.
Connect a 13,8 to 16V DC supply to the DC 13.8V jack of SMD.
•
Be sure to observe the proper polarity.
Plug in the USB cable.
•
Turn on the Station Master Deluxe and proceed to Configuration Management tab of Station Master
•
Deluxe device to enter your station configuration.
microHAM © 2016 All rights reserved
Installing microHAM USB Device Router
IMPORTANT: Locate the USB cable but DO NOT
connect it to the USB jack of Station Master Deluxe at
this time.
To install Router click on the Install USB Device
Router link on the installation CD or download the most
recent installation package from the web site:
www.microham.com/contents/en-us/d29.html
If you download an updated package, right click on
"urouter_release_xx_xx.exe" (xx_xx is version) and
choose "Run as administrator" to start installation.
When the Router installation is completed, click
"Finish" to launch Router for the first time.
18
Advertisement
