microHAM STATION MASTER DeLuxe Manual page 21

Restore Router Settings: used to restore settings from a urs file created by the backup command.

A urs file can be used only with the device for which it was generated (the file contains the unit serial

number) on a computer with same port assignments.

WARNING: Restoring a backup deletes all current Router settings including presets, use it carefully!

Backup Router Settings: used to create backup urs file.

This file contains Router settings (including Presets) for all devices defined in Router.

Options | General

Load Router on Start-up: when checked, Router will start automatically each time the computer is

started or rebooted.

Start Router Minimized: when checked, Router will started minimized

Default Region: Select your default band plan region.

Options | Band Map:

Customizable band edge boundaries used to drive the band data output. BCD codes can be customized for

driving antenna switches or bandpass filter control.

Options | Digital Band Map:

Options | Audio Devices:

Options | DVK:

(Not used with Station Master Deluxe)

Options | USB:

Noise immunity: selects how many times an undelivered USB packet will be repeated before the USB

device is disconnected from the operating system.

Response time: selects how long the USB interface will wait for additional data before sending data to

the operating system.

Minimize: Clicking this will minimize Router to the system tray at the bottom right corner of the Windows Task

Bar (the "System Notification Area").

TIP: When Router is minimized you can restore it by double-clicking on the Router tray icon. You can

also restore Router by double-clicking on the Router icon on the desktop or in the Programs menu.

Exit: Clicking on this item will terminate Router.

NOTE: When Router is terminated the virtual ports will be closed and application software will be unable to

communicate with Station Master Deluxe and the radio.

6 - microHAM USB DEVICE ROUTER

(Not used with Station Master Deluxe)

ROUTER MENU